BA_CA-800.book Seite 25 Dienstag, 9. Februar 2010 12:27 12
CoolAir
CA-800
7.3
Remote control
The following control elements are available on the remote control for oper-
ating the system:
No. in3,
Meaning
page 3
1
STANDBY button
The system can be switched between active and standby
modes.
2
Temperature - button:
The - button decreases the temperature by 1 °C.
3
Temperature + button:
The + button increases the temperature by 1 °C.
4
Mode - button:
The mode - button switches to the next mode down.
5
Mode + button:
The mode + button switches to the next mode up.
8
Using the roof air conditioner
The manufacturer assumes no liability for failure to observe this op-
erating manual, in particular for any consequential damage, espe-
cially that caused by failure of the air conditioner.
Do not insert foreign objects into the system.
8.1
Tip for improved use
Observe the following instructions for use to ensure your WAECO CoolAir
roof air conditioner is used efficiently:
Avoid opening doors and windows as far as possible during cooling.
Select a suitable temperature and operating mode.
Make sure the blower nozzles (1 1, page 3) and the intake unit (1 2,
page 3,) are not covered by cloths, paper or other objects.
Using the roof air conditioner
25