AMURA CASTOR 16A3D Manual De Instrucciones página 39

6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine is factory assembled except for the
handlebars and wheels.
Inspect the product carefully to ensure that there are
no damaged items. If you find a damaged part or a
missing element, do not use the machine until the
defect has been repaired or you have all the parts
that make up the machine. Using the machine with
defective parts or without all its elements can cause
severe personal injury.
6.2. ASSEMBLY
6.2.1. MOUNTING THE PROTECTIVE HOUSING
Connect the three pivots in their respective housings.
6.2.2. CHANGING THE HANDLEBAR POSITION
This machine has the possibility of working in two
directions, depending on the type of accessory to be
used. To change the position of the handlebar, unhook
the gear shift lever (9) and the accessory operating
lever (10).
Then squeeze the handlebar changeover lever (8) and
move the handlebar only in the direction shown by the
icon. The handlebar can only turn on one side.
39/144
English