Vitrifrigo STRATOS 6000 Manual De Instrucciones página 28

Changing the temperature setting
To change the setpoint temperature, press the " " and " " buttons to the desired
temperature.The new setpoint remains on the display.
The setpoint can be changed within a predetermined range: from a minimum of
17 to 30°C
The lower the temperature set, the higher the unit's consumption will be.
If the desired temperature is not reached in ECO mode or with a low fan speed, raise the
fan speed or switch to AUTO mode.
Setting the timer
The Stratos air conditioner is equipped with a timer for timed switch on/off. At the end of
the time set in the timer, the air conditioner switches on/off.
If the timer is activated, the display shows the remaining time.
Each time the key is pressed, the timer increases by 30 minutes. A long press excludes
the timer.
Delayed ignition
With the air conditioner on, press the Timer key until the desired time is reached.
Press the on/off key to switch off the air conditioner. The time remaining until switch on will
be visible on the screen.
The air conditioner will turn on at the end of the count, with the settings active at the time
of the last shutdown.
Delayed shutdown
With the air conditioner on, press the Timer key until the desired time is reached.
The time remaining until switching off will be visible on the screen.
The air conditioner will turn off when the count is complete.
Switching off the air conditioner
The air conditioner is turned off by pressing the ON/OFF key for more than 2 s.
The air conditioner stores the latest settings.
User parameter programming
Access the user parameter programming menu on the display by pressing key 1 and 2 on
the control panel simultaneously or using key 7 on the remote control.
Use the 3 and 4 keys on the keyboard to scroll through the menu items.
Use the 5 keys to select the menu items.
ENG
28
V