ieGeek ZS-GX7S Guia De Inicio Rapido página 21

special network incompatibility, the App and
the camera cannot be connected correctly.
In this case, our camera is not compatible,
please contact the after-sales service first.
(service@iegeek.com)
Fast power consumption?
1) In the case of poor wifi coverage (such as
signal is below 75%),which will increase
power consumption;
2) The PIR trigger frequency is high,and the
power consumption will increase when
infrared light/white light is on at night;
3) The mobile phone often accesses the
camera remotely, which will increase the
power consumption;
4) For the first use,it's recommended to use
the power to 10%,and then charge it to
100%, which is helpful for the health of the
lithium battery.
Camera not detecting movement?
1) In the case of unstable network,the
message may not be pushed in time
after the PIR is trigged.In this case, you
can first confirm the network status and
remove the camera to verify and confirm
in an environment with good network
coverage;
2) Inappropriate installation position will
result in PIR not triggering and not
detecting. If the position is too high, the
object is too far away, or the object is too
small, the camera will not trigger, try to
adjust the installation position according
to the trigger requirements for many
times.
SD card not recognized?
1) Support capacity is 16~128GB micro SD
card;
2) Before use, make sure to format the
EN | 13