Bianchi E-ARCADEX Manual Del Usuario página 5

INFORMATION!
New and innovative components and features are being developed all
the time.
To check compatibility with drive units other than those originally
installed on the Bianchi frame or to receive information and
instructions on specific components that may be required to install a
product or upgrade one, please contact your preferred Bianchi retailer.
HEAD SET AND HANDLEBAR STEM AND BEND
The product uses a head set system for use with the ICR integrated cable routing system manufactured by FSA. Bearing diameters are 1½" for the
upper and lower parts.
The handlebar stem is compatible with seat posts measuring 28.6 mm in diameter and handlebar bends measuring 31.8 mm in diameter.
The height of this type of handlebar stem is adjustable by a specialist retailer. Due to the importance and complexity of this component, please
consult your retailer for stem adjustment and to fully understand the mechanisms and adjustment methods.
DANGER!
Always comply with the torque values specified on the stem. Incorrect tightening may cause
the component to malfunction or break, causing the rider to lose control and fall.
Never use this product with incomplete or incorrect assembly. This endangers not only the
rider but also other road users.
The gear/brake control levers are mounted on the handlebar using a clamp integrated into
the lever.
Pay close attention to the recommended positioning of the levers and respect the limits
indicated by the high grip zone (Image 1A).
Consult the lever product handbook for the correct torque. To preserve the integrity of the
handlebar bend, do not exceed the maximum torque of 10 Nm.
WARNING!
Turn the handlebar left and right. Do not use the bike if there is any evidence of abnormal steering (play in the steering or uneven resistance) or if
any cracks or signs of damage are evident.
In the event of an accident or fall, the handlebar will almost certainly be involved and will be subjected to high levels of stress and impact. In the
event of any deep scratches or cracks, replace the components.
B1
X
WB
E-Arcadex
SIZE A B1 C D E F
XS 440 520 434 70 125 596 74.5° 70.5° 50
SM 480 532 434 70 140 603
MD 520 548 434 70 155 609 73.5° 71°
LG 550 563 434 70 170 625 73.5° 71°
XL 580 583 434 70 185 640
Image 1A
G G1 H I X Y WB
416 364 564 1020
74° 70.5° 50 416 366 579 1028
50 416 372 594 1034
50 416 382 609 1049
73° 71° 50 416 392 623 1064
5