GCE OC Serie Manual Del Usuario página 8

1. PRODUCT OVERVIEW
WORKING PRINCIPLE
Oxygen Concentrator for Medical Use adopts the principle of pressure swing adsorption
technology. At normal temperature, the machine can continuously separate medical oxy-
gen with high concentration (93%±3% oxygen for medical use) from the air when its power
is turned on. The machine is easy to operate and quick to use, its flow can be adjusted.
The oxygen supplying method is unique, and is superior to liquefied and high-pressure
oxygen.
Note: Using oxygen concentrator doesn't influence oxygen content in the air of the room.
EN
FLOW DIAGRAM
APPLICATION SCOPE
This equipment is used to provide oxygen only for medical use and health care.
It is not be used for life supporting or life sustaining. SysMed recommends an alternate
oxygen supply device in the event of power outage, alarm condition, mechanical failure,
or for the persons who are in dire need of oxygen. (Such as oxygen cylinder or liquid oxy-
gen).
Contraindication: Patients with severe carbon monoxide poisoning are prohibited to use
the equipment.
2. UNPACKING, TRANSPORT AND STORAGE
UNPACKING
1. Check for any obvious damage to the carton or its con-
tents. If damage is evident, notify the carrier, or your local
dealer.
2. The carton is design into two parts (carton body and car-
ton base), it can be easily un packing by lifting the carton
body upwards. Remove all foam filled block and loose
packing from the carton.
3. Carefully take out all the components and the machine
from the carton. Inspect/examine exterior of the oxygen
concentrator for nicks, dents, scratches or other damag-
es. Check all components as listed. If there are missing
components or quality issue, please contact your local
dealer.
NOTE: Please keep the carton and packing materials for
storage and transport.
8/193