Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS (CONTINUED)
Using the Manual and Remote Controls
On the top-right side of the electric fireplace (A) is the control panel. The buttons on the front of the
electric fireplace (A) and the remote control (B) function in the same way. The remote control has an
effective range of up to 13 ft.
1. Power Button
2. Flame Control Button
3. Heater Control Button
4. Timer Control Button
5. Digital Display Panel
Check that the heater outlet grill is not covered or obstructed in any way, and make sure the power
to the unit is switched on. The fireplace can be accessed in two ways: Using the touchpad control
panel, or using the multifunction remote control unit.
Press the appropriate button to operate your fireplace:
Using the Power Button
• The main power button (1) is located on the
control panel on the front of the electric fireplace.
• Pressing the power button (1) once turns the
power on.
• Pressing the power button (1) again will turn the
power off.
• If you find that none of the other buttons appear
to work, check to make sure that the main power
(1) is turned on.
Using the Flame Control Button
• Press the flame control button (2)
to turn on the ember bed and
flame effect.
• Pressing the flame control button (2)
once turns flames on and lights the
ember bed.
• Pressing the flame control button
(2) again will cycle through different
colors of the ember bed. The color
rotation mode will cycle through
different color settings continuously.
Reference the table for more
detailed information.
1
4
2
3
JY-3B
JY-3B
Button Press
Display Value
1st Press
2nd Press
3rd Press
4th Press
5th Press
6th Press
7th Press
12
5
2
1
4
3
The plastic tab inside the battery
compartment MUST be removed
before the remote control will operate.
(Pull Tab)
Ember Bed and
Flame Color
1
Orange
2
Green
3
Blue
4
Orange/Green
5
Orange/Blue
6
Orange/Green/Blue
7
Cycle
Publicidad
