Skil RO502601 Manual Del Propietário página 10

Turn the Speaker ON/OFF (Fig. 3)
a) To turn on the Bluetooth speaker, press and
hold the ON/OFF button for approximately 1
second; the blue indicator will illuminate and
begin to flash to indicate that the Bluetooth
speaker is active.
b) To turn off the Bluetooth speaker, press and
hold the ON/OFF button for approximately
3 seconds; the blue indicator light will be
off to indicate that the Bluetooth speaker is
deactivated.
c) When the Bluetooth speaker has not been
in use for approximately 10 minutes, the
Bluetooth speaker will automatically turn off
with a sound and the blue indicator light will
be off.
Volume
Use the Volume + button and Volume - button to increase or decrease the volume of the
speaker, respectively.
USB Power Port (Fig. 4)
When a battery pack is installed and the
speaker is turned on, the USB power port on
the Bluetooth speaker supplies a charging site
suitable for your cell phone or other small USB
device (5 Volt DC, up to 2.1 Amp).
NOTICE:
Any device that uses more than 2.1A
of DC electrical current will trip a self-resetting
overload switch and disable the output. To
reactivate the Bluetooth speaker, remove the
device and turn on the Bluetooth speaker.
10
Fig. 3
ON/OFF Button
Fig. 4
Indicator