Skil RO502601 Manual Del Propietário página 11

Connecting to Bluetooth
a) Turn on the Bluetooth speaker. The speaker will default to Bluetooth pairing mode and the
indicator light will flash blue continuously until it has successfully paired or has timed out.
b) If previously paired to the desired device, the speaker will automatically reconnect to the
same device when the speaker is turned on.
c) If no Bluetooth device was previously paired, the speaker will continue to search for a signal
for about 10 minutes.
d) To pair the speaker to a different device, press and hold the Bluetooth pair button for 3
seconds until the blue indicator light flashes. The speaker will then be in Bluetooth pairing
mode and can be connected to a different device. Consult the instructions for your device.
Connecting directly to AUX Device
a) Insert the plug of the audio wire into the audio IN jack and make sure that they are properly
connected.
b) Turn on the Bluetooth speaker. The speaker will be in AUX mode and the indicator will
shine blue.
c) Connect an MP3 player, CD player, or other audio device directly to the speaker, using the
audio wire and plug.
NOTE: In the absence of a connection to an audio wire, the speaker will enter into Bluetooth
pairing mode. When connected to an audio wire, the speaker will change from Bluetooth
pairing mode to AUX mode.
11