Publicidad
Idiomas disponibles
Idiomas disponibles
Starting and stopping the belt sander
1. Before plugging in the power cord (10), make sure the
ON/OFF switch (11) is turned off;
2. Hold the sander by the handles (3, 4);
3. Press the "ON/OFF" switch to start the sander;
4. To turn off, release the "ON/OFF" switch;
Handling
1. Place the entire surface area of the sanding belt on
the material;
2. Switch on the sander, and move it with some pressure
over the workpiece, doing linear movements;
3. Use a thicker sanding belt for greater material
removal and a thinner sanding belt for finishing. To
decide on the best type of sanding belt to use, perform
tests before using it.
The dust created while the equipment is in use
can be hazardous to health:
▪ Always wear goggles and dust mask when sanding;
▪ All individuals working with the sander or coming
into the work area should wear a dust mask;
▪ It is forbidden to eat, drink and smoke while using the
sander;
▪ This sander is used for sanding wood, iron, plastic and
similar materials;
▪ It is strictly prohibited to use this sander on plaster
and surfaces that have leaded paint;
You can turn the sander upside down and attach it to a
workbench using the screw two clamps (12) provided.
You only have to place the two screw clamps on the
fixing points (13).
For more convenience and ease of use, press the
ON/OFF switch lock-on button for continuous
operation.
30
MAINTENANCE AND CLEANING INSTRUCTIONS
Before inspecting, performing any maintenance or
cleaning, turn off the sander and unplug the power
cord.
The belt sander does not require any additional
lubrication or maintenance. However, regular cleaning
should be carried out to ensure continuous, trouble-
free operation.
Cleaning and storage
Cleaning
After each use, clean all belt sander components. Clean
the sander with a clean, moist cloth or blow with low
pressure compressed air. Careful handling protects the
power tool and extends its service life.
The power tool and its ventilation slots must be kept
clean. Clean the ventilation slots regularly or whenever
they become blocked.
Storage
When not in use, store the belt sander in a dry, clean
place, free of corrosive smoke and out of children's
reach.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can obtain information regarding the disposal of
the power tool through the person in charge for
recycling in your city.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Site:
www.centrallobao.pt
Publicidad
