iRobot Roomba Combo i5+ Manual Del Usuario página 13

Cleaning the Edge-Sweeping
Brush
1
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
EN
in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
8 For more information, visit global.irobot.com
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to
remove it from the robot.
Important: A front wheel clogged with
hair and debris could result in damage
to your floor. If the wheel is not
spinning freely after you have cleaned
it, please contact Customer Care.
2
Pull firmly on the wheel to remove it from its
housing
Axle Wheel
Housing
3
Remove any debris from inside the wheel
cavity.
4
Reinstall all parts when finished. Make sure
the wheel clicks back into place.