Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Automatic Dirt Disposal
EN
Your dirt disposal will tell you if something is wrong via an LED indicator on the
front of the canister and through the iRobot Home App.
LED indicator
Common error
Solid red
Bag full or missing
Blinking red
There is a leak or
a clog in the dock
evacuation path
This product has been equipped with a thermal protector designed to protect
against damage due to overheating. If the protector operates, the motor will
stop running. If this happens, unplug the unit, allow it to cool for 30 minutes,
clear any obstructions from the evacuation port and evacuation tube, then plug
the unit back in.
12
For more information, visit global.irobot.com
How to fix
1. Replace the bag if it is full or
missing.
2. Make sure that the bag is securely
inserted.
3. If problem persists, remove any
debris from the port on the bottom
of your robot and the dirt disposal.
1. Make sure that the canister lid is
pushed down and firmly sealed.
Hold the CLEAN button on your
robot down for 2–5 seconds to
manually empty the bin.
2. Remove any debris from the port on
the bottom of your robot and dirt
disposal.
3. Unplug the dirt disposal from the
wall. Place it on its side and inspect
the debris evacuation tube for
debris. If necessary, remove the
tube to clear any debris.
Robot
Your robot will tell you something
is wrong by playing an audio alert
and turning the light ring indicator
red. Press CLEAN for details.
Further support and instructional
videos are available in the iRobot
Home App.
If you are unsure if the robot is
finished or paused, consult the
iRobot Home App to check on its
status.
Battery Safety and Postage
For best results, only use the iRobot Lithium Ion Battery that comes with
your robot.
WARNING
: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
post this product for service, travel or any other reason, you MUST follow the
postage instructions below.
•
Battery MUST be turned off before postage.
•
Turn off the battery by removing the robot from the Clean Base and
holding down
for 10 seconds. All indicators will turn off.
•
Package the robot securely for postage.
•
If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
Red light ring
Low battery. Please charge.
Publicidad
