Elinchrom ELB 500 Manual De Funcionamiento página 9

User Manual
STATE OF CHARGE
The battery includes a monitoring circuit which shows the available
capacity of the battery when the state of charge button is pressed.
80 – 100 %
60 – 80 %
40 – 60 %
< 20 – 40 %
CHARGING / DISCHARGING RECOMMENDATIONS
EN • The battery pack can be used / discharged at ambient
temperatures from -10 °C to +60 °C.
• The battery pack can be charged at ambient temperatures
from 0 °C to +45 °C. Charging is not recommended at
temperatures below 0 °C.
BATTERY PACK CONNECTION
The ELB 500 Battery is intended to be used with the ELB 500 TTL
flash unit ONLY.
TO CONNECT YOUR BATTERY TO THE ELB 500 TTL UNIT:
1. Place the ELB 500 unit on a flat, dry and clean surface.
2. Place the charged ELB 500 Battery on a flat, dry and clean
surface.
3. Place the ELB 500 over the ELB 500 Battery.
4. Press smoothly down onto the ELB 500 housing until you
8