Descargar Imprimir esta página

Bimar VR35 Folleto De Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

danger and must be disposed of according to applicable regulations in recycling containers.
Warning: any stickers or advertising leaflets applied must be removed before using the
appliance.
• Assemble the 4 wheels onto the base, turning to tighten into the respective holes: lock by
pushing the lever down. Check that all 4 wheels touch the floor.
• Before connecting the appliance, check that the voltage on the data plate matches that of the
electric system. In the event of incompatibility between the power socket and the appliance's
plug, have the plug replaced with a suitable model by a qualified professional, who should
ensure that the cable is appropriate for the power rating of the device. The use of adaptors or
extensions is generally not advisable; if it is necessary to use them, they must comply with
safety regulations and the total current (amps) must not be rated lower than the maximum
current of the appliance.
• Before each use, check that the appliance is in good condition and that the power cord is not
damaged: if in doubt consult a qualified professional.
• The plug point must be accessible so as to easily remove the plug in case of an emergency.
• Stand the appliance on a flat, horizontal and stable surface, and keep it away from:
- heat sources (e.g. open flames, gas stoves, etc.)
- liquids (e.g. from bathtubs, showers, sinks etc.) to avoid splashing water and to prevent it
from falling into them (the appliance should be kept a minimum of 2 metres away).
- fabrics (curtains, etc.) or floating materials/particles that may block the aspiration grid;
check also that the front part is free from floating particles (dust, etc.).
This device is NOT suitable to use it in an explosive environment (in the presence of
flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when, after
ignition, the combustion is spread in the air).
• If there is a fault or the appliance is not working correctly, switch it off and have it checked by
a qualified professional. Repairs done by an unqualified person can be dangerous and cause
the guarantee to become void.
• The appliance comes with the following parts:
Water tank (10) Is at the back. It slides out like a drawer and it is locked into place with a
-
lever (9). Add demineralised water that is limescale and additive free (no essences,
detergents or other). Do not exceed the max. level marking (approx. 6,50L: running time
of approx. 8-9 hours) or fill to below the min. level (approx. 1 litre). The 2 ice bricks
provided can be added to cool the air down further after having been frozen in a freezer
for at least 10 hours.
Front grille: the horizontal flaps (3) can be adjusted up or down manually. The vertical
-
flaps (4), automatically swivel right and left by pressing the button on the control panel.
Filters. These are found at the back of the appliance, secured with a frame containing one
-
screw (5): the external pre-filter (8) traps dust, fluff, etc., while the internal filter, made of
honeycomb cellulose, is sprayed with water and thereby cools the air that passes through
it.
The fan functions are operated with both the keypad of the control panel and the remote
control which must be pointed at the front (maximum distance of about 4m) towards the
control panel; for the first use add from the battery (N.1 battery type: CR2025/3 Volts, not
included inside the box).
13/44

Publicidad

loading

Este manual también es adecuado para:

Bl-128dlr-a