Publicidad
Idiomas disponibles
Idiomas disponibles
1.5
Residual risks
The device has been built in accordance with the applicable standards and the recognised safety
rules and corresponds to the state of the art. However, according to the risk assessment of the ap-
plied safety standard DIN EN 61010-1, injuries to persons, damage to the device or material dam-
age to the infrastructure cannot be completely ruled out during use.
Danger from electricity
Touching damaged cables can lead to electric shock, resulting in fatal injuries.
Only operate the device if all cables are undamaged.
u
Never operate the device with the housing removed or open.
u
Carry out maintenance work as described in the operating instructions.
u
Danger due to incorrect supply voltage
An incorrect supply voltage may damage the device and render it inoperable.
The device may only be connected to voltage sources that match the type plate.
u
Danger from moisture and condensation on electronic components during operation.
Moisture inside the device may led to damage and render the device non-functional.
Carry out maintenance work as described in the operating instructions.
u
Danger from use of aggressive chemicals for cleaning
The use of aggressive cleaning agents can damage the device.
Do not use aggressive chemicals or solvents for cleaning.
u
If the device has nevertheless come into contact with aggressive chemicals, check it immedi-
u
ately for damage.
Faulty measured value display during operation
Incorrect display of measurements cannot be completely ruled out.
Apply the access code to prevent parameters from being changed by unauthorised persons.
u
Carry out maintenance work as described in the operating instructions.
u
Unauthorised access to the device
Unauthorised access by third parties may lead to changes in the configuration and incorrect mea-
surements therefore cannot be ruled out.
Ensure that the operator takes safety precautions to prevent unauthorised access.
u
14 / 124
Your Safety
Publicidad
