Domo DO7273S Manual De Instrucciones página 38

DO7273S
5. When you want to clean carpet, make sure that the brushes in the floor nozzle are
retracted.
6. When you have finished vacuuming, unplug the vacuum cleaner and
automatically rewind the cord by pressing the foot pedal with the
Make sure that the plug does not whip back and forth while rewinding the cord,
by guiding the cord with your hand. This to prevent possible damage.
2
MAINTENANCE
Check the hose, dust bag and filter regularly. Empty the hose when it is clogged,
replace the dust bag when it is full and clean the filter when it is dirty.
Disposable dust bags and filters
The dust bag and the motor filter play a very important roll in the efficiency of the
vacuum cleaner. The purpose of the dust bag is to capture dirt, but at the same time
the filter needs to be porous enough to allow air to pass through. If the bag or motor
filter get clogged, no air can pass through the cleaner and no cleaning can take place
regardless of how powerful the unit is.
To keep the cleaner operating at maximum efficiency, change the dust bag
frequently and clean the filter when needed. Some fine particles can restrict the
air flow very quickly and will decrease the performance even before the bag appears
to be full. For that reason, the bag and filter may need to be changed more often
when vacuuming carpet fresheners or cleaners, powder, plaster dust or similar fine
substances.
Replacing the dust bag and cleaning the motor filter
Be sure to turn off and unplug the vacuum cleaner before
replacing the dust bag or cleaning the filter. Never vacuum
without the dust bag or filter in place.
1. Turn off and unplug the vacuum cleaner.
2. Remove the hose from the hose connection and open
the dust bag compartment by pushing the handle
upwards and lifting the lid.
3. Slide the dust bag out of the frame and remove the dust
3
6
38
symbol.
2
3