Stiebel Eltron Ultronic-1 Plus Funcionamiento E Instalación página 10

INSTALLATION
Safety
INSTALLATION
8. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
8.1 General safety instructions
We guarantee trouble-free functional and operational reliability
only if original accessories and spare parts intended for the ap-
pliance are used.
8.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
9. Appliance description
9.1 Standard delivery
The following are delivered with the appliance:
- Wall mounting bracket (fitted on the appliance)
™
10 | Ultronic Plus & Premium Hand Dryers
- HEPA filter
- Torx key
- Spare screw
- 3 screws and 3 rawl plugs to secure the wall mounting
bracket
- Cable cover with 2 screws
- Drilling template (in the center section of these instructions)
10. Preparation
10.1 Installation site
Property damage
!
The appliance is exclusively designed for indoor instal-
lation. The appliance can be damaged if it is exposed to
the elements.
Note
The appliance must be installed flush against a wall with
sufficient load bearing capacity.
Mount the appliance only on a vertical wall.
www.stiebel-eltron-usa.com