Stiebel Eltron Ultronic-1 Plus Funcionamiento E Instalación página 18

INSTALLATION
Cleaning and maintenance
WARNING Electrocution
Do not forget to screw on the grounding connection
screw. The grounding connection screw is located on
the rear of the unit in the upper right-hand corner.
11.7 Installing the appliance
1.
Position the appliance centrally over the wall mounting
bracket so the metal retainer on the back of the appliance is
above the fixture of the wall mounting bracket.
Press the appliance against the wall and slowly push the ap-
pliance down as far as it will go.
™
18 | Ultronic Plus & Premium Hand Dryers
2.
3.
On the underside of the appliance, fasten the locking screw
into the wall mounting bracket using the provided Torx key.
Switch on the power supply or insert the mains plug on the
power cable, if fitted, into the standard safety socket.
The LED on the front of the appliance flashes red three times, then
lights up white. The unit is ready for operation.
Check the appliance function.
11.8 Appliance handover
Explain the functions of the appliance to the user.
Draw special attention to the safety instructions.
Hand over these operating and installation instructions to the
user.
12. Cleaning and maintenance
WARNING Electrocution
Before any work on the appliance, disconnect all poles
from the power supply.
Before starting any cleaning and maintenance work, remove
the appliance from the wall mounting bracket.
www.stiebel-eltron-usa.com