General information
Principle
The main feature of the new Active Inverter Technology is intelligent charging. Tailored to
the requirements of the lead or lithium battery to be charged, the charging behaviour
adapts automatically to the age and state of charge of the battery. This innovation extends
the service life of the battery and reduces the amount of maintenance required, while at the
same time improving cost effectiveness.
Active Inverter Technology is based on an inverter with active rectification and an intelli-
gent safety cut-out. The charging current and voltage are held constant by a digital control
that is not affected by any fluctuations in the mains voltage.
Device concept
The compact design reduces space requirements and makes portable use considerably
easier. In addition to its many existing features, the charger has a modular design that
makes it easy to upgrade; it is therefore ideally equipped for future requirements. A wide
range of options are available. A 14.4 V voltage limit provides optimum protection for the
vehicle electronics in charge mode.
Warning notices
A number of safety symbols can be seen on the charger's rating plate. The safety symbols
on the device
must not be removed or painted over.
XCharge_professional
Art. Nr.:
00029095050
SN:
00000000
In:
~230V 50/60Hz;1120W
Out.:
DC 2V-14,4V/35A
Always stop charging before you disconnect the charging cable!
xxxxxxxx-xx
Do not use the functions until you have read all the operating instructions.
Possible sources of ignition, such as fire, sparks and naked flames, must be kept
away from the battery.
Risk of explosion! Oxyhydrogen is generated in the battery during charging.
Battery acid is corrosive and MUST be kept away from eyes, skin and clothes.
Ensure an adequate supply of fresh air during charging. Fit the device at least
50 cm above the floor.
Do not dispose of used chargers with domestic waste. Dispose of them accord-
ing to the safety rules.
51