Makita DTD137 Manual De Instrucciones página 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Switch trigger
6 Lamp
7 Button
8 Reversing switch lever
9 Changed in four steps
SPECIFICATIONS
Capacities
No load speed
Impacts per minute
Rated voltage
Overall length
Battery cartridge
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
10 Hard
11 Medium
12 Soft
13 T mode
14 Battery capacity
15 Bit
16 Sleeve
17 Bit-piece
18 Groove
Model
Machine screw
Standard bolt
High tensile bolt
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Net weight
DTD137
4 mm – 8 mm
5 mm – 16 mm
5 mm – 14 mm
0 – 3,400 min
0 – 2,100 min
0 – 1,100 min
0 – 3,400 min
0 – 3,600 min
0 – 2,600 min
0 – 1,100 min
0 – 2,600 min
D.C. 14.4 V
119 mm
BL1415,
BL1415N
1.2 kg
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
ENE033-1
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
GEA010-1
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
19 Hook
20 Screw
21 Standard bolt
22 Fastening torque
23 Proper fastening torque
24 Fastening time
25 High tensile bolt
DTD148
4 mm – 8 mm
5 mm – 16 mm
5 mm – 14 mm
–1
0 – 3,600 min
–1
0 – 2,100 min
–1
0 – 1,100 min
–1
0 – 3,600 min
–1
0 – 3,800 min
–1
0 – 2,600 min
–1
0 – 1,100 min
–1
0 – 2,600 min
D.C. 18 V
119 mm
BL1815,
BL1430,
BL1815N,
BL1440
BL1820
1.4 kg 1.2 kg
–1
–1
–1
–1
–1
–1
–1
–1
BL1830,
BL1840,
BL1850
1.5 kg
GEB054-2
5