Publicidad
Idiomas disponibles
Idiomas disponibles
4.2. PICO CELL
The electrical connections at cell level:
- must not be oriented upwards in order to avoid any deposit of water or moisture on them.
- must be sufficiently and regularly (re)tightened using an appropriate wrench.
A
1) Fully disassemble the cell as per the exploded diagram above.
2) Rub down all bonding surfaces with sandpaper: sleeve D, pipe E.
3) Glue the assembly [sleeve
4) Wait for the glue to dry completely.
5) Grease seal C.
6) Place seal
C
at the bottom of electrode B.
7) Insert electrode
B
into sleeve D, paying attention to the fool-proofing devices.
8) Screw on and tighten nut
Exploded diagram of the assembly:
B
A
: Nut
B
: Electrode
C
: Seal
D
: Sleeve
E
: Pipes (50 mm outer diameter)
D
- pipe E].
A
by hand onto sleeve D.
I
C
E
D
17
Publicidad
