Publicidad
Idiomas disponibles
Idiomas disponibles
Important
The connection must be made by authorised,
skilled personnel, in accordance with the rele-
vant legal requirements, using appropriate and
specified materials . The appliance is supplied
with operating voltage 230V/1N .
Caution - Warning
Before doing any work, cut off the mains elec-
tricity supply .
Connect the appliance to the mains electricity
supply as follows:
If not already present, install a circuit-breaker
1)
(A) with overload cutout and differential safety
breaker close to the appliance .
Undo the screws (B) to remove the control pa-
2)
nel (C) .
Connect the circuit-breaker (A) to the terminal
3)
board (D) of the appliance as shown in the dia-
gram and in the electrical system diagram at the
back of the manual . Use a flexible cable with at
least type H07RN-F characteristics, rated for an
operating temperature of at least 80°C .
Important
Before it is put into service, the system must
be tested to check the operating conditions
of every single component and identify any
malfunctions . In this stage, it is important to
check that all health and safety requirements
have been complied with in full .
To test the system, make the following checks:
Check that the mains voltage is the same as that
1)
of the appliance .
3326481_inst_GB
ELECTRICAL CONNECTION
B
When connecting, take care to connect the
neutral and earth lines .
Replace all on completion of the operation .
4)
TESTING OF THE APPLIANCE
Operate the appliance's circuit-breaker to check
2)
the electrical connection .
Check that the safety device is operating cor-
3)
rectly .
After testing, if necessary instruct the user in all
the skills necessary for putting the appliance into
operation in conditions of safety, in accordance
with legal requirements .
- 9 -
B
C
Important
A
D
GB
ENGLISH
Publicidad
