Aventics ED05 Instrucciones De Servicio página 54

Válvula reguladora de presión
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 179
54
AVENTICS | ED05 | R414002533–BAL–001–AG
For your safety
During commissioning
During operation
During cleaning
Disposal
Before commissioning, make sure that all the connection
seals and plugs are leaktight to prevent fluids and foreign
bodies from penetrating the device or plug connections and
destroying the electronics.
Ensure that both mounting screws have been tightened with
the correct torque. Never loosen the two screws on the
device cover.
Other system parts may be damaged by uncontrolled device
movements if it has not been properly mounted. Make sure
that the device is securely fastened.
Touching the valve coil during operating may lead to burns.
Let the device cool off before disassembling. Do not touch
the device during operation.
If the housing ventilation port is closed, there is no
atmospheric equalization and the characteristics curve will
change. Ensure that the air can circulate freely through the
housing ventilation port. Never operate the device in an
atmosphere containing oil.
Never use solvents or aggressive detergents. Only clean the
device using a slightly damp cloth. Only use water to do this
and, if necessary, a mild detergent.
Dispose of the device in accordance with the currently
applicable regulations in your country.

Publicidad

Tabla de contenido
loading

Tabla de contenido