Controlling The Ed05 Pressure Regulator - Aventics ED05 Instrucciones De Servicio

AVENTICS | ED05 | R414002533–BAL–001–AG
8 Controlling the ED05 pressure
regulator
You can continually adjust the pressure once you have
connected the electrical and pneumatic supply on the ED05
pressure regulator. To do this, the ED05 pressure regulator is
e.g. controlled via a controller or potentiometer using a set
point. The electronics compare the set point with the outlet
pressure, which is measured by a pressure sensor, and
generate a control variable that is used to control the 3/3-way
valve with U/I converters and a proportional magnet. This sets
the stipulated pressure.
24 V
23
24
CONTROLLER
25
Abb. 7: Function block diagram for ED05 with analog output
 Inlet connection for supply pressure
 Outlet connection
 Exhaust connection
23 Supply voltage
24 Set point input
25 Actual value output

Controlling the ED05 pressure regulator

U
P
U
I
71

 
00125308