English
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by D
WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact D
Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-D
WALT (1-800-433-9258) or visit our website:
e
www.D
WALT.com.
e
MAXiMUM RECOMMEnDED CAPACiTiEs
E-Clutch® System
Mechanical Clutch
RPM
WOOD
Auger
Self-feed
Hole saw
METAl
Twist
MAsOnRY
Diamond core bit
Aerated concrete block/
breeze block/cinderblock
Brick
nOTE: For holes in metal larger than 1/2" (13 mm), use hole saws.
Repairs
The charger and battery pack are not serviceable.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a D
service center or a D
Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
WARRAnTY sERViCE: Registering your product will
•
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
12
e
WALT Industrial
e
LOW SPEED
HIGH SPEED
YES
YES
YES
NO
0–400
0–1320
2" (51 mm)
2" (51 mm)
4-5/8" (117 mm)
4-5/8" (117 mm)
6-1/4" (158 mm)
6" (152 mm)
1/2" (13 mm)
5/16" (8 mm)
6" (152 mm)
6" (152 mm)
5" (127 mm)
5" (127 mm)
WALT factory
e
WALT authorized service center.
e
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.D
Three Year Limited Warranty
WALT
For warranty terms, go to https://www.dewalt.com/
support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
Joppa Road, Towson, MD 21286 or call 1-800-4-D
(1-800-433-9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1-800-433-9258) for a free replacement.
WALT.com/register.
e
WALT Industrial Tool Co., 701 East
e
WALT
e
WALT
e