Publicidad
Idiomas disponibles
Idiomas disponibles
6- REMOTE CONTROL
6.1- REMOTE CONTROL A
Sliding lid of remote control is closed in this illustration.
1
3
MODE
2
SWING
DIRECT
5
When batteries
are removed from
the remote control,
they should be
deposited in
recycling bins.
1 DISPLAY
2
3 MODE
4 FAN
4
FAN
5 SWING
7
6 DIRECT
6
7
Indicates the settings, timers and func-
tions selected.
ON/OFF button. Use to switch the unit
ON and OFF.
Use to select the operating mode.
Following options can be selected in the
shown sequence:
AUTO -> COOL -> DRY -> HEAT -> FAN <-
Use to set the fan speed. Following four
options can be selected in the shown
sequence:
AUTO -> LOW -> MED -> HIGH <-
Activates nd de-activates the oscillating
movement of the swing unit.
DIRECTION button. Use to change the
angle of the swing unit. Each time the
button is pushed, the angle of the swing
unit changes by 6º. If the swing unit
stops at any position in which it would
affect the cooling and heating effect of
the air conditioner, it would automati-
cally change the angle. As long as this
button is pushed down no symbol is
shown on the display.
TEMP/TIME buttons. Use the
to increase the indoor temperature set-
ting or to adjust the TIMER in clockwise
direction. Use the
se the indoor temperature setting or to
adjust the TIMER in counterclockwise
direction
6
button
button to decrea-
Publicidad
