Publicidad
Idiomas disponibles
Idiomas disponibles
8- INDICATORS ON THE DISPLAY OF REMOTE CONTROL
8.5- TIMER OPERATION
WARNING
During timer operation the remote control automatically transmits timer signals to the indoor unit at
the fixed time settings.
Therefore keep the remote control at any place from where its signals are able to reach the receiver
in the indoor unit properly.
With the remote control you can preset a max. timer operation period of 24 hours.
TIMER button
1. Press the TIMER button as required.
The current timer settings are displayed and they start flashing.
On the left the indicator for TIMER ON or TIMER OFF is
displayed.
TEMP/TIME buttons
2. Use to set the desired time.
Increase
Decrease
Each time one of these buttons is pressed and released again,
the time indicator increases or decreases by 10 minutes,
depending which button is pressed. The time indicator changes
as fast as the button is pressed.
3. After completion of the timer settings TIMER ON and TIMER
OFF, ensure the timer indicator on the display panel of the
indoor unit is activated.
Cancel
To cancel the timer settings, press the CANCEL button.
Change
To change the timer settings, perform above steps 1 – 3.
15
Publicidad
