Publicidad
Idiomas disponibles
Idiomas disponibles
6- REMOTE CONTROL
6.2- REMOTE CONTROL B
Sliding lid of remote control is open in this illustration.
1 RESET
Use to cancel all current settings and to
return to the initial settings.
2 LOCK
Use to lock all current settings. During
LOCK mode the remote control does
not accept the operation of any button
except the LOCK button. To cancel the
LOCK mode press this button again.
3 TURBO
TURBO: Press the button for less than 2
SLEEP
seconds to activate the TURBO mode. In
TURBO mode, the fan operates at very
high speed. In this mode, the set tempera-
ture will be reached in the shortest time.
To switch off TURBO mode, press the
TURBO/SLEEP button for less than 2
seconds again.
SLEEP: Press the button for more than 2
seconds to change to the energy-saving
operation mode. To cancel the SLEEP
mode press this button for more than 2
seconds again. The SLEEP mode can only
be selected in COOL, HEAT, and AUTO
mode and automatically adapts the most
comfortable temperature for you.
NOTE
The SLEEP mode is automatically deac-
tivated, when MODE, FAN or ON/OFF
button is pressed.
4 CLOCK
CLOCK button. Use to set the current
time.
5 TIMER
Use to set the start-up time (turn ON
operation) and to set the shut-off time
(turn OFF operation) for TIMER mode.
6 CANCEL
Use to cancel the TIMER ON/OFF set-
tings.
7 LED SENSOR
LED SENSOR: Press the button for less than
2 seconds to activate the LED SENSOR
function. The display of the indoor unit
is switched off. To switch the display
back on, press the LED SENSOR button
for less than 2 seconds once again.
7
Publicidad
