Setting the mode of operation
• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. TTL flash mode).
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
TTL
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
0.8 - 9.0 m
selecting the mode of operation to appear.
M-
m
35
Zoom
m
EV
O
MODE
• Press the
touch display and select
TTL
M HSS
TTL HSS
A
• Press the
p
q
touch display.
The setting will take effect immediately.
TTL HSS
Second curtain synchronisation (REAR) is
automatically deactivated when the flash
9.0 m
unit is set to high-speed synchronisation
M-
HSS!
m
35
Zoom
m
P
1/1
sensor buttons on the
TTL HSS
resp.
.
TTL HSS
sensor button on the
7.5 Automatic flash mode
In the automatic flash mode
unit sensor
reflects back from the subject. The sensor
has a coverage of about 25°, and only mea-
sures the light for the time a flash is fired by
the mecablitz.
The flash is cut off as soon as sufficient light
has been emitted for correct exposure. The
sensor
at the subject.
Setting the mode of operation
M
• Switch on the flash unit with the
button.
9.0 m
The start screen appears. Thereafter, the
flash unit always switches on with the
M-
m
35
Zoom
mode of operation that was used last .
m
P
• Press the sensor button of the displayed
1/1
mode of operation on the touch display as
O
MODE
many times as it takes for the display for
selecting the mode of operation to appear.
TTL HSS
A
• Press the
M HSS
touch display and select
p
q
• Press the
display.
A
• Set a suitable mode of operation on the
camera, e.g.
0.8 - 9.0 m
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
M-
m
35
Zoom
m
EV
A
, the flash
measures the light that
of the mecablitz has to be directed
sensor buttons on the
A
.
A
sensor button on the touch
A
.
k
175