Displays And Buttons; Setting The Time; Setting The Date; Using The Chronograph - MIYOTA 0S21 Manual De Instrucciones

4. INSTRUCTION MANUAL
A) DISPLAYS AND BUTTONS
Chronograph
minute hand
Hour hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd position so that the second hand stops at (0) position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position in synchonization with a time
signal, small second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown to left to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the crown back to the normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to
maxinum of 60 min.
Measuring time with the chronograph
1. Press button "B" to change the watch to the chronograph mode.
The second hand stops at the 0 second position, and changes to the chronograph
1/1 second hand.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the chronograph and all hands return to their 0 positions.
Center Chronograph
1/1 second hand
Button A
Button B
Second hand
Minute hand
Normal crown
position
Calendar