FrostEmily PEGASO FISH Instrucciones De Uso página 5

Operator's guide:
1)Unpacking instructions
2)C leaning of the internal tank
3)E xternal cleaning
4) Drip trays
5)C onnection to the water supply
6)Connection to the mains
7)Operations and adjustment
8)I nternal cleaning
! WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2
. It is forbidden to modify in any way the main functions and characteristics of this appliance. . The
electrical installation of the appliance should be carried out by a qualified electrician or other competent
4
person. . Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
5
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
6
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
7
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice. 8
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance near
sources of heat, such as radiators, stoves, etc.
11
least 30 cm. . If damp air or products to be refrigerated should cause ice to form on the evaporator, we
recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the
same temperature, until defrosting is completed;if this is not carried out the compressor will continue to
operate leading to a wasteful consumption of electricity and poor performance.
! Our products are for internal use only do not install outside restaurants, shops.
UNPACKING INSTRUCTIONS
1.
1a.
Cut the strip. Remove the cardboard packaging by sliding upwards, remove the nails from the wooden
2.
crate with care. Insert forks of fork-lift truck between appliance and pallet or crate. . Lift the appliance.
4.
Remove the pallet or crate. . Place the appliance on a horizontal level surface. . Make sure there is
nothing left inside the packaging before disposal. . Separate the different packaging materials to
facilitate disposal. (See picture 1)
CLEANING OF THE INTERNAL TANK
2.
1
. Remove the protection film from stainless steel parts. . Clean the tank with a soft sponge and neutral
3.
detergents. Remove the plastic caps from the drainage holes in the tank to drain off any residual water
(See picture 5).
EXTERNAL CLEANING
3.
1.
Absolutely refrain from using detergents containing alcohol or derivative products which would
irremediably damage the dome.
special water emulsion-based products, free from solvents, generally available on the market.
a clean cloth.
DRIP TRAYS
4.
1
. Remove the protection film from the trays.
NOTICE:
tank. start with the first shelf, positioned centrally, with no holes and with a central slot.
(see picture 6)
CONNECTION TO THE WATER SUPPLY
5.
1.
One end of the water supply pipe, which is situated inside the tank, must be screwed onto the solenoid
valve, and the other end connected to the water supply (A). . One end of the drainage pipe must be
connected to the appliance coupling using a clamp, and the other end to a standard water drain (B).
3.
The mains water should be drinkable, and preferably purified (see picture 4).
Operator's guide
Maintenance manual (Page 49):
1)Cleaning the condenser
2)Water level tank
3)Wiring diagram diagram of refrigeration unit
10
. Keep the ventilation grills free from obstruction for at
5
7
2.
Use only a soft dampened sponge. . Clean the wooden surfaces with
2.
Mount the drip trays by resting them on the bottom of the
5
9
2
3
2
3
3
6
4.
Dry with
I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO