Publicidad
Idiomas disponibles
Idiomas disponibles
6.
CONNECTION TO THE MAINS
1
. Ensure that mains voltage and frequency are the same as those stated on the rating plate (A) attached
I
to the appliance. . Ensure that the supply socket:
rated current as set out on the rating plate;
UK
switch with In = rated value as stated on the rating plate; - differential with Id sensitivity = 30 mA.
3
. Ensure that there is no danger of explosion (AD) in the room. . Make sure the environment is suitable
for the power supply cable provided. The cable of the appliance is H05 VVF, designed for internal use.
D
5
. Insert the plug in the socket (do not use three-way adapters and reduction adapters).
equipment has been transported or stored overturned, let is rest in its correct position for at least 3 hours
E
before hooking it up to the mains (see picture 3).
F
7.
OPERATIONS AND ADJUSTMENT
The controls are located inside a protected recess on one side of the appliance.
NL
(1)Refrigeration switch:
P
!
CAUTION:
Before placing goods ensure that:
1.
S
The appliance is plugged in. . The refrigeration unit switch is switched on with the green light lit up.
3.
Make sure the water supply is efficient (model Fishing only)
direct light of the sun or high powered lamps. . The ambient temperature does not exceed that in which
DK
the appliance is designed to work normally, i.e.+25°C U.R. 60% (climatic class 3). .There are no air
currents from doors, windows, ventilators or air conditioner pipes, going to the inside of the appliance.
FIN
7.
After a few minutes, ice starts to come out of the nozzle.
B
INTERNAL CLEANING
8.
1
. Switch off the electrical supply. . Remove goods and store in another suitably refrigerated place kept
GR
at the same temperature. . Remove the ice from the bottom of the tank. . Remove the plug from the
bottom of the tank.
6.
CZ
soda.
Carefully dry everything and return everything to its initial position before starting up the
appliance once again.
EE
LV
LT
H
M
PL
SK
SLO
Operator's guide
2
for turning on the refrigeration system
2
2
3
5.
Wipe walls and accessories with a soft sponge dipped in water and a little baking
a)
is properly earthed;
c)
complies with the IEC regulations:- thermal-magnetic
4
(See picture 2).
. 4.
The appliance is not exposed to the
5
6
b)
fulfils the requirements of the
N.B.:
if the
6
4
Publicidad
