Technical Data; Electric Connection; Machine Description - HOLZMANN MASCHINEN BS 125M Manual De Instrucciones

2 TECHNICAL DATA

Motor output
performance S1 (100%)
Voltage/ ~
Engine speed
Band saw blade feed rate
Blade length
tilt
Net/gross weight
Sound pressure level L
PFA
Sound level L
WA
Cutting capacities:

3 MACHINE DESCRIPTION

1 Feeding handle with starter button
2 On/OFF button
3 Speed governor knob
4 Clamping lever
5 Workpiece stop
6 vice
7 Saw blade guide
8 Vice Clamping lever
9 Blade tension knob
HOLZMANN Maschinen GmbH
kW 0.4
V/Hz 230/50
U/min 2000-4000
continuous
m/mi 35-80 conti-
n nuous
mm 1435
° 0-60
kg 22/24
dB 77
dB 90
www.holzmann-maschinen.at

4 ELECTRIC CONNECTION

The machine may be connected solely to a circuit
with short circuit protection.
The power socket must match with the power
plug oft he machine. If it does not, let the power
plug be adapted by a qualified electrician.
The power plug must be grounded/earthed.
If you are not sure, that all these prerequisites
are fulfilled, let the power circuit, -plug and –
socket be checked by a qualified electrician.
Operating a non-grounded/earthed ma-
chine inhibits the risk of
ELECTROCUTION!
-which may lead to severe injuries
and even death!
5 OPERATION
Prior to any checks or adjustments
disconnect the machine from the
power supply!
This prevents the risk of accidental
start-up.
Before first use:
Remove the thin corrosion-prevention layer
from the not-painted machine parts.
Do not use Nitrite-Solvents or other aggressive
solvents. Do not use water.
The use of thinners, gasoline aggressive
Chemicals or abrasives destroys the surface
and leads to fastened corrosion later on.
Prior to every usage:
Check the machine for loose or missing
screws, for damaged parts, check the condi-
tion of the saw blade
Assure yourself, that all tools etc.. apart form
the workpiece itself are removed from the
machine!
W A R N I N G
A T T E N T I O N
page 10