Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Refrigerator
03 Energy Saver / Override E-smart (3 sec)
Energy Saver
Override
E-smart
04 Door Alarm
Door Alarm
05 Control Lock (3 sec)
Control Lock
22
English
TBI_Dacor_UserManual_DA68-03581B-00_EN.indd 22
Use Energy Saver mode to reduce power consumption. Press Energy
Saver to turn on or off Energy Saver mode and the corresponding
indicator. By default, Energy Saver mode is enabled.
The Override E-smart function activates/deactivates Smart Grid.
Press Energy Saver for 3 seconds to set/clear the Override E-smart
function.
You can enable or disable the door alarm by pressing Door Alarm.
When Door Alarm is enabled and a door is left open for more than 2
minutes, the alarm will sound and the alarm indicator will blink. The
Door Alarm function is enabled by factory default.
To prevent accidental setting changes, press and hold Control Lock for
3 seconds. All controls will be disabled and the Lock indicator (
turn on.
When Control Lock is on, the refrigerator does not dispense ice or
water, even if the Dispenser Lever is pressed.
To deactivate, press and hold again for 3 seconds. The Lock indicator
turns off and the controls are re-enabled.
When Control Lock is on, the indicator blinks if any button on the
panel is pressed or the Dispenser Lever is pressed.
) will
2022-11-18
5:56:15
Publicidad
