Publicidad
Rotation Direction
To make the bit turn forward and start drilling move the selector to the rotation direction (D)
up to the arrow pointing the chuck. To make it turn in reverse and use the drill as screwdriver
move the rotation direction lever towards the arrow pointing the hammer drill handle.
WARNING
Never use the tool in reverse with the operation mode selector in the
IMPACT positions (
,
damaged.
WARNING
Never change the position in the rotation selector lever while the hammer
drill motor is running.
Changing the Operation Mode
• Press the blocking button (E) and turn the function
selector (F) into one of the 4 positions depending on the
work to carry out until hearing a click. Assure the selector
is properly secured.
Never change the function selector
WARNING
position when the hammer drill motor is running.
Drill
Wood, Metal or Plastic Drilling
Metal, wood or plastic can be drilledwith
the tool using drill / accessory bit) three
jaws chuck with an SDS adapter.
• To install the three jaws chuck, go as with any other SDS accessory
(page 7, Installing or removing the bit/accessory).
• Set the bit into the three jaws chuck until is stops and secure with
the chuck key tightening each one of the orifices alternatively.
WARNING
Never use the three jaws chuck with the selector
in the operation mode in the IMPACT positions (
8
ENGLISH
,
). Otherwise the impact system will get seriously
Hammer Drill
,
Start Up
E
Chisel + Free mode
(24 settings)
,
).
Rotation Direction Selector
in the Drilling Position
D
A
F
Chiseling
Publicidad
