Cherubini Ocean RX Instrucciones página 32

ADJUSTMENT OF THE LIMITS SWITCHES ON TORQUE
LIMIT SWITCH SETTING ON A CASSETTE AWNING (closing on torque)
On a cassette awning is possible to set the upper limit on torque closing. Connect the
motor, set the remote control and move the motor by moving the adjustment screws in
+direction as close as possible to the upper limit switch and stop the motor. Now move
again the adjustment screws for three (3) turns beyond the upper limit.
+
B C
This system ensures, when used it with box awnings,
that the awning remains completely closed, without
the awning fabric undergoing excessive stress from
pulling.
The motor has been set in the factory to a
predetermined closing force setting, equal to 40%
of the rated torque. With the remote control it is
possible to change this setting, reducing it to 20%, or
increasing it to 70%, depending on the desired result.
BEHAVIOR OF MOTORS ON LIMIT SWITCH AND
Ocean RX
CLOSING FORCE ADJUSTMENT
A
OBSTACLE DETECTION
UPPER LIMIT SWITCH IN
TORQUE CLOSING (Cassette
awings or rolling shutter)
The motor goes every time to
the limit-stop and does not a
reverse movement.
70%
40%
20%
OBSTACLE DETECTION IN
UP MOVEMENT
The motor stops and does not
a reverse movement.
32
A
B
C
2 sec