Cherubini Ocean RX Instrucciones página 33

It detects movements caused by the wind on the awning arms.
MISTRAL- Ref. A520012
To associate the sensor to the control unit, a remote control must be already memorized.
Set the selector to the 0 position and then perform this sequence:
+
A B
To delete the sensor from the control unit, an already programmed remote control must
be used. Set the selector to the 0 position; if active wait for the sensor to go off and then
perform this sequence:
I
+
A B
For the complete description of the functions of this device see the instruction booklet
that came in the box.
COMPATIBLE DEVICES
MISTRAL SENSOR
SETTING THE SENSOR
B
DELETING THE SENSOR
A
33
SET BUTTON
LED
SELECTOR
set
2 sec
set
2 sec