Components
1
Cover grid, front
2
Wings
3
Cover grid, rear
4
Screw hole
5
Motor shaft
6
Screw hole
7
Oscillation knob
8
Adjustment knob
9
Motor housing
10
Nozzle
11
Rod extension, top
12
Screw
13
Rod extension, bottom
14
Weight
15
Base
16
Mounting screw
Assembly
Head Assembly:
STEP1:Unscrew the 4 lock screw on the face of the fan housing, handle the rear grill to the motor housing by
matching its 4 screw hole to the 4 screw hole on the front motor housing, then screw the lock screw to lock the
rear grill and the front motor housing.
STEP2:insert the motor shaft into the fan blade by matching the motor shaft spindle to the D-shaped cut-out on
fan blade, then screw the lock screw.
STEP3:Center the front grill. Allganing the logo, so it is horizontal and parallel to the floor, place onto the rear
grill, and snap in place. Secure by tightening the grill button screw at the bottom of the rear grill.
Pole Assembly:
Unscrew the screw in locking shaft at the bottom of fan housing. insert the upper extension pole to the locking
shaft with the right hole position.
Base/Pole Assembly:
Unscrew the screw at the bottom of the lower extension pole, and insert the pole through the base, then
handtighten the base screw to securely fasten the lower extension pole to the base.
How to use
Speed control
Turn the rotary switch to "I, II, III" to set the fan speed. Turn the rotary switch to "0" to turn the fan off.
Oscillation
Push down the oscillation knob and the fan will oscillate.
Pull up the knob, the fan will not oscillate.
Technical information
Operating voltage:
Power consumption
Cleaning
•
Always disconnect the appliance from the power outlet before cleaning. Never immerse the appliance
in water to prevent electric shocks.
•
Wipe over the exterior of the appliance with a soft wet cloth and then wipe dry with a dry cloth.
•
Please do not use any aggressive or chemical cleaning agents or abrasive cleaning agents such as
steel wool.
•
If you do not use the appliance for a long period of time, please store it in a dry place protected from
dust.
In case of complaint
•
You can claim the device within 24 months from date of purchase (receipt).
•
A free replacement or repair will be excluded from prior improper product handling.
•
Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are
therefore with costs.
•
If you want to make a complaint, please bring the entire device in its original packaging and with proof of
CoolBreeze 5000 SVM
gunmetal grey
220-240V~ / 50Hz
60W