Gude GKH 2000 Traducción Del Manual Original página 21

Operation
Control panel
Position
1 + 2
Switch on the unit
If you have set up the unit correctly and ready for
operation as described in the chapter Commissioning,
you can now switch it on.
Set heating level
With the toggle switches
1
between heating level 1 , 2 and 3.
» Toggle switch only : heating level 1 (750 W)
1
» Toggle switch only : heating level 2 (1250 W)
2
» Toggle switch +
1 2
(750 W + 1250 W = 2000 W)
Note
The control lamps on the respective toggle switch
only switch on as soon as the room thermostat is in
operation.
MIN
1
2
3
and you can choose
2
: heating level 3
2
1
MAX
3
Convection heater GKH 2000
Toggle switch heating level 1 (750 W)
Toggle switch heating level 2 (1250 W)
Toggle switch heating level 3 (750 W + 1250 W = 2000 W)
Room thermostat control dial
Setting the room thermostat
MIN
To set the stepless rotary control
thermostat to the desired room temperature, please
proceed as follows:
1. Set the control dial
2. Let the unit run until the desired room tempera-
ture is reached.
3. Slowly turn the control dial
unit switches off.
ENGLISH
MAX
of the room
3
to max.
3
back until the
3
21