Cressi ISUP Manual Del Usuario página 12

Accessories
Once the SUP has been inflated, you can go on assembling the accessories, including
fins. Identify your fastening system and follow your model's diagram to fasten the fin.
Repeat in reverse to extract it.
WARNING
Sharp back of the fin, handle with care
U.S. fins with screw
Fastening
1
Insert the plate inside the base from the center towards the end with the help of the threaded pin
(Fig. 1). Place the end of the fin in the base and slide it until aligning the pin with the plate (Fig. 2).
Screw the threaded pin clockwise until it stops (Fig. 3).
U.S. QUICK fins with pads
Fastening
1
Insert the pad into the corresponding fin's slots and place the end of the fin into the base (Fig.
1). Slide in (Fig. 2) and rotate the fin until it stops (Fig. 3). Add pads to increase the grip of the fin.
8
2
2
3
3