patura P 5000 Manual De Usuario página 42

Montageanleitung / Instructions de montage
Installation Instructions / Montagehandleiding
Indicaciones de montaje
Requirements for electric animal fences
In accordance with Annex BB Section BB.1 of IEC 60335-2-76
Electric animal fences and their ancillary equipment shall be installed, operated and maintained in
a manner that minimises danger to persons, animals or their surroundings.
Electric animal fence constructions that are likely to lead to the entanglement of animals or
persons shall be avoided.
WARNING!
Avoid contacting electric fence wires especially with the head, neck or torso. Do not climb over,
through or under a multi-wire electric fence. Use a gate or a specially designed crossing point.
An electric animal fence shall not be supplied from two separate energisers or from independent
fence circuits of the same energiser.
For any two separate electric animal fences, each supplied from a separate energiser
independently timed, the distance between the wires of the two electric animal fences shall be at
least 2.5 m (8'). If this gap is to be closed, this shall be effected by means of electrically
non-conductive material or an isolated metal barrier.
Barbed wire or razor wire shall not be electrified by an energiser.
A non-electrified fence incorporating barbed wire or razor wire may be used to support one or
more off-set electrified wires of an electric animal fence. The supporting devices for the electrified
wires shall be constructed so as to ensure that these wires are positioned at a minimum distance
of 150 mm (6") from the vertical plane of the non-electrified wires. The barbed wire and razor
wire shall be earthed at regular intervals.
Follow our recommendations regarding earthing.
A distance of at least 10 m shall be maintained between the energiser earth electrode and any
other earthing system connected parts such as the power supply system protective earth or the
telecommunication system earth.
42