Capitani elite 626 Instrucciones De Uso página 24

Programming dispensing
• Check that there are no capsules in the machine and turn
it on with the main switch (11).
• Close the small cup support (10) and place a large empty
cup under the dispensing spout (4).
Big cup: Press and hold the button (3). The machine will
start delivering water. Once the desired water level is reached
release the button (3). The machine will then stop delivering
water and the desired quantity will be memorized for future
dispensing. (Fig.11)
Small cup: Press and hold the button (2). The machine will
start delivering water. Once the desired water level is reached
release the button (2). The machine will then stop delivering
water and the desired quantity will be memorized for future
dispensing. (Fig.11)
To prepare coffee and beverages, proceed as indicated on
the previous page, pressing the button (2) or (3) according
to your taste.
After preparing coffee and beverages
After preparing the beverages, the used capsule is eliminated
as follows:
• Lift the control lever backwards (the capsule falls into the
container provided).
ATTENTION: for correct hygiene, it is advisable to
eject the capsule immediately after use.
The capsule container can hold up to 12 used capsules.
Empty the container regularly.
• If you want to make another coffee insert a new capsule
and repeat the procedure, otherwise close the lever.
• After dispensing the beverage and ejecting the used
capsule, it is advisabled to dispense some water only to flush
away any residue.
Emptying the capsule container
The capsule container can hold at the most 12 capsules,
so it should be emptied regularly to avoid the capsules
getting stuck.
To perform this operation, take out the drip tray (6)
(Fig. 12) and separate it from the capsule container by
pulling
it down, paying attention to the presence of any
liquid.
Empty the container, wash and dry the components
before putting them back in their places. (Fig. 13)
Fig. 11
Fig. 12
Fig. 13
22
11
2
3
6
6