Capitani elite 626 Instrucciones De Uso página 25

STORAGE
If the machine is not to be used for a long time, switch it off, take out the plug and empty the tank.
Put the appliance away in a dry place, sheltered from dust and out of the reach of children.
It is advised to put the appliance away in its original packaging. Keep the machine at a temperature
not lower than 5°C to prevent any water residue from freezing and damaging
the appliance.
REPAIRS/MAINTENANCE
In the event of a fault, malfunction, or damaged power cable, do not attempt to repair the appliance
but apply to qualified personnel. Never try to start up faulty or damaged machines. Only authorised
service centres can carry out repairs of any kind. The manufacturer declines all liability for damage
to property and/or persons that may occur as a result of adaptations, alterations or improvised
repairs, or repairs not carried out by qualified personnel.
CLEANING
Good maintenance of the coffee machine ensures a better performance over time and a longer
life.
Turn off the switches and remove the plug from the power socket before performing any cleaning
operations.
Never immerse the appliance in water, clean it only with a damp cloth, non-abrasive detergents,
and dry it immediately.
The components (grid, drip tray, capsule container and tank) can be washed by hand with
non-abrasive detergents or in the dishwasher at medium temperature.
REMOVING LIME SCALE
The formation of lime scale is the natural consequence of use of the machine. The frequency with
which scale should be removed depends on the hardness of the water used:
- remove scale every 6 months in the case of soft water (up to 25°f)
- remove scale every 4 months in the case of hard water (over 25°f)
To remove lime scale use a non-toxic or non-harmful descaling product for coffee machines, readily
available on the market.
Do not use vinegar, lye, salt or formic acid as they would damage the machine.
WHAT TO DO IF:
Problem
Machine does not start
The machine dispenses
coffee slowly
Cause
Plug not correctly inserted
Faulty components
Internal components clogged by
scale
Ensure that the plug is inserted in a live power
socket and that the main switch (11) is pressed
Apply to service centre
Remove scale from the machine as described
in the respective paragraph
23
Solution