TIMER OPERATION
This water-resistant digital cooking timer provides both countup and countdown
features in hours, minutes and seconds.
To set the time to countdown:
•
Press the Start/Stop:
button to turn on the backlight.
Press the HR button (1) to set the number of hours. Hold the button down to fast-
•
forward digits (maximum setting: 99 hours) (4).
Press the MIN button (2) to set the number of minutes. Hold the button down to
•
fast-forward digits (maximum setting: 59 minutes) (5).
When the time is set, press the Start/Stop:
•
countdown.
•
When the time is up, the alarm will sound for 30 seconds and automatically restart
countdown from previous time setting.
When the timer has over an hour left on the countdown, H and M (Hours
and Minutes) will flash on and off; numbers will count down every minute.
When the timer has less than an hour of time left, H and M turn to M and S
(Minutes and Seconds) and the seconds count down; numbers will start to
count down every second.
To clear the time:
Press the Start/Stop:
•
button to turn on the backlight.
•
Press the HR and MIN:
buttons simultaneously (1)(2).
To set the time to countup:
Press the Start/Stop:
•
button to turn on the backlight.
•
Press the Start/Stop:
button again to start countup. While counting up,
display will show the reading in hour/minute and minute/second formats.
Press the Start/Stop:
•
button twice to stop timer. The countup will stop
after 99 hours (4), 59 minutes (5).
Automatic shut-off:
•
To save battery life, the backlight turns off after 10 seconds. The timer will turn
completely off after 10 minutes of inactivity.
NOTE: If using the timer in an environment that subjects it to electrostatic discharge (static
electricity) the time setting may be lost. If this happens, reset the timer.
Battery installation:
•
Use a Phillips screwdriver to unlock the battery compartment on the back of the
timer (6) by turning the screw clockwise.
•
Remove the battery cover from the back of the timer (7).
Add or replace the AAA batteries (8).
•
•
Replace the battery cover.
•
Lock the battery cover by turning the screw anticlockwise with a Phillips
screwdriver.
•
After the batteries are installed, (
Maintenance:
•
Do not clean the timer with an abrasive or corrosive compound. Doing so may
scratch it or corrode the electronic circuits.
•
Do not subject the timer to excessive force, shock, dust or expose it to excessive
temperatures or humidity. Doing so may result in its malfunction, shorter electronic
lifespan, battery damage or distorted parts.
•
Do not tamper with the internal components of the timer. Doing so will invalidate
the timer's warranty and may cause unnecessary damage to the battery and
internal parts.
•
Do not subject the timer to excessive exposure to direct sunlight or heavy rain.
•
Do not immerse the timer in water.
For best performance, it is recommended to bring the timer
indoors when not in use.
22
button (3) to start the
IMPORTANT
00
00) will display on the LCD screen.
OPERATING
4
5
1
7
2
3
6
8