How To Install Batteries; Functions And Operations - Ultrasport 331100000022 Manual Del Usuario

COMPUTER FUNCTION
KEY GUIDE
MODE : To select functions of time, speed, distance, calories and pulse. Hold this button for 2 seconds
to go to the beginning.

HOW TO INSTALL BATTERIES

1. Remove battery cover on the back of monitor.
2. Place 2 AAA batteries into the battery housing ensuring they are installed correctly and replace the
cover.
3. If the display is illegible or only partial segments appear, please remove the batteries and wait for
15 seconds before installing new batteries. Old batteries should be disposed or correctly in line with
Local Regulations.
4. Removing the batteries will erase monitor display.

FUNCTIONS AND OPERATIONS

The monitor will start up automatically if the exercise machine is in motion. If you stop
AUTO ON /OFF
Press "mode" key to select "scan" mode w/a "scan" sign on the upper left corner of
SCAN the Monitor. Then this function will automatically scan through all the functions and
display each value in turn in the LCD display.
TIME Automatically accumulate workout time when starting exercise.
ODO Monitor will display the total accumulated distance.
SPEED Display current speed during workout time
DISTANCE Displays distance covered during workout.
CALORIES Displays calories burned during workout.
Automatically detects and displays your current heart rate when exercising, press the
button until the arrow points to PULSE. The monitor will display your current pulse
rate per minute. To measure your pulse, place the palms of your hands on both of the
PULSE
contact pads and the monitor will show your current pulse per minute (BPM) in the
LCD display. Note: the pulse sensor should be used as a workout guide only and is not
a medical device.
GB
29
www.ultrasport.net