Publicidad
Idiomas disponibles
Idiomas disponibles
Connections
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
fig. a
ANTENNA
AM
4
LOOP
FM
UNBAL
75 Ω
1
Connect the AM antenna wires.
Hold the terminal part of the wire when connecting.
2
Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3
Place the AM antenna on a flat surface and
in a direction giving the best reception.
4
Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
fig. b
2
1
3
Using external antennas
To improve FM reception
Use a PAL connector (not supplied) to connect an external
FM antenna.
75 : coaxial
cable
Plugging in
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the unit
into an AC outlet.
This unit's rear panel
To AC outlet
Power cord
One-touch PAL
connector
ANTENNA
FM
UNBAL
75 Ω
AC IN
03
11
En
Publicidad
