Thermo Fisher Scientific TSV18CPSA Instalación Y Funcionamiento página 15

Start-Up Procedure
Control panel TSV18CPSA
Once the unit is turned on, the display screen will display for
three seconds. The unit will run on Setting 3 automatically.
Temperature Setting
The temperature settings run from cold (1) to coldest (5), each
time the Temperature Setting button (A) is pressed. After the
appropriate setting is selected, the unit will run according to
that setting.
Note: The unit will start running on the set value 25 seconds
after choosing the particular setting.
Standby Mode
• Press the Temperature Setting (A) button for three
seconds to activate standby mode. The Standby
indicator light will illuminate.
• Press the Temperature Settings (A) button for three
seconds to resume normal refrigerator operation. The
Standby indicator light will go out.
Setting the Freezer
Temperature
• Turn the freezer temperature dial clockwise to reach a
colder temperature.
• Turn the freezer temperature dial counterclockwise to
reach a less cold temperature.
General Purpose Refrigerators and Freezers
Control panel TSV20RPSA
and TSV20FPSA
TEMP
ZONE
.
1. Coldest
2. Colder
3. Cold
4. Freezer and Refrigerator
A. Temperature setting
• Once powered on, the display screen will fully display for
three seconds, and then the normal operation functions
will display.
Lock/Unlock
• When the temperature control panel is unused for 15
seconds, the panel will automatically lock.
• Press the Temperature Setting key (A) for three seconds
to unlock the temperature control panel, if locked. All of
the LED lights will blink for two seconds when the panel is
unlocked.
Temperature Setting
• Press the Temperature Setting key (A) each time to
change the temperature setting.
• The settings will cycle from cold to coldest, in order.
• After 15 seconds, the temperature will change to the
appropriate setting.
Start-Up Procedure | 11