Publicidad
Idiomas disponibles
Idiomas disponibles
middle hinge, and fix the top hinge by fitting screws, finally to install the top hinge cover and hole cap.
2.4. CHANGING THE LIGHT
Any replacement or maintenance of the LED lamps is intended to be made by the manufacture, its service agent
or similar qualified person.
2.5. STARTING
545 mm
545 mm
545 mm
930 mm
880 mm
930 mm
2.6. ENERGY SAVING TIPS
■
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
■
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil. Be sure to wrap foods
properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up
inside the appliance.
■
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere
with cold air circulation, making the appliance less efficient.
■
Organize and label food to reduce door openings and extended searches. Remove as many items as
■
Before initial start, keep the refrigerator still for half an hour before
connecting it to power supply.
■
Before putting any fresh or frozen foods, the refrigerator shall
have run for 2-3 hours, or for above 4 hours in summer when the
ambient temperature is high.
■
Spare enough space for convenient opening of the doors and
drawers or statement by the distributor.
13
EN
Publicidad
