Dacor Modernist DOC30M977D Serie Instrucciones De Instalación página 21

Electrical connection
WARNING
Electrical Shock Hazard
• Disconnect power before servicing.
• Use 8 gauge solid copper wire.
• Make sure to ground the oven.
• Failure to follow these instructions can result in death, fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply wire and a cabinet-
connected ground (green or bare) wire twisted together.
A
A. UL listed or CSA approved conduit
connector
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 21
1. Disconnect power.
Feed the flexible conduit from the
2.
oven through the opening in the
cabinet.
Remove junction box cover if it is
3.
present.
4. Install a UL listed or CSA approved
conduit connector to the junction box.
5. Route the flexible conduit from the
oven to the junction box through a
UL listed or CSA approved conduit
connector.
6. Tighten screws on conduit connector.
7. See "Electrical Connection Options
Chart" to complete installation for your
type of electrical connection.
English 21
2019-09-20 PM 3:46:38