Dacor Modernist DOC30M977D Serie Instrucciones De Instalación página 28

Troubleshooting
Information codes
Displayed code
C-d0
C-d1
C-F0
C-F2
C-20
C-21
C-23
C-30
28 English
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 28
Possible cause
This code occurs if the control
key is short for 1 minute.
This code occurs if the door lock
is mispositioned.
This code occurs if
communication between the Main
and Sub PBA is interrupted.
This code occurs if
communication between the Main
and Touch is interrupted.
The oven sensor is open when
the oven is operating.
The oven sensor is short when
the oven is operating.
This code occurs if the internal
temperature rises abnormally
high.
The temp probe sensor is short
when the oven is operating.
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when the
oven is operating.
Solution
Clean the buttons and make sure
there is no water on/around
them. Turn off the oven and try
again. If the problem continues,
contact a local Dacor service
center.
Touch PAUSE/OFF and OFF, and
then restart the oven. If the
problem persists, disconnect all
power to the oven for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
Touch PAUSE/OFF and OFF, and
then restart the oven. If the
problem persists, disconnect all
power to the oven for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
2019-09-20 PM 3:46:39